SM-XMQ1000A Operation

This coder is available for the addressing and the testing after addressed. After the addressing, the input wire of LED strip
powered off with the coder and connected to DMX512 controller or console, the control effect program would be operated by controllers or console. The coder SM-XMQ1000A can implement the setting of customized initiative channel value.
The specific operation is as follows:
1. After the signal wire of neon flex is connected to the coder, it can be powered on;
2. The built-in effect programs of the coder after powered up is total 9 models. Pressing “CFM” can switch by different models. When the display of coder shows the letter “LOOP” , the effect plays in loop; If press “CFM”again, it always plays at one same effect. For example, the following picture is that one when playing at the eighth effect.

Ο LED Controller SM-XMQ1000A μπορεί να οδηγήσει όλα τα Genius DMX512 RGB Wallwasher καθώς επίσης και την Digital Magic Neon Flex GloboStar SKU:22627

Δείτε παρακάτω τα προτεινόμενα προϊόντα τα οποία μπορεί να οδηγήσει ο συγκεκριμένος Controller SM-XMQ1000A

LED RGB GENIUS DMX512 TTL Output Controller SM-XMQ1000A 5-24v για RGB Wall Washer και Digital Neon Strip GloboStar 22629

 Τεχνικά Χαρακτηριστικά

• Ισχύς: < 3W
• DMX Output Channel: DMX 512 + TTL
• DMX Output Protocol: Yes (DMX 512) + (TTL)
• Κανάλια Εξόδου: 1
• Τάση Λειτουργίας: 5-24v Volt DC
• Κατάλληλο για: LED digital tube screen, LED pixel light screen, LED Digital Neon Strip 22627, RGB Genius WallWashers.
• Εγγύηση: 1 Χρόνος

Διαστάσεις Προϊόντος:

• Μήκος: 6,8cm
• Πλάτος: 5,3cm
• Ύψος: 1,8cm
• Βάρος: 111gr